news

Home/Tag: news

CEVLAB USES 3D LASER SCAN TO REDUCE SCRAP

CEVLAB USES 3D LASER SCAN TO REDUCE SCRAP A COSA SERVE IL CONTROLLO DIMENSIONALE DEGLI STAMPI PRE E POST STAMPAGGIO? The dimensional check over a mould before and after pressing allow us to detect any critical issue on the printed product as well as to reduce production scraps. Thanks [...]

2019-09-23T09:25:29+01:00September 18th, 2019|Senza categoria|

In Cevlab laboratory we carry out environmental tests

IN CEVLAB LABORATORY WE CARRY OUT ENVIROMENTAL TESTS Ensure the best performance under any condition Products are often exposed to environmental and mechanical stress on a daily basis. Heath, cold, humidity, atmospheric agents, extreme environmental conditions may have consequences on the functioning of products and machineries. It becomes of essential importance for us to [...]

2019-07-24T13:11:35+01:00July 24th, 2019|Technologies|

SUNLIGHT EXPOSURE LEAKAGE TEST IN CEVLAB LABORATORY

WHICH IS THE FUNCTION OF SUNLIGHT EXPOSURE LEAKAGE TESTS? The ultraviolet leakage consists of the capability that some material posses to resist ultraviolet or sunlight. These two, in particular, may have a strong impact on the appearance and mechanical properties that materials possess. In fact, those materials which are employed in the exterior [...]

2019-07-30T13:46:44+01:00July 9th, 2019|Technologies|

THE FIRST “GRUPPO BRUNO BUSINESS FORUM”

THE FIRST “GRUPPO BRUNO BUSINESS FORUM” On the 6th and 7th of June it has been held in the new Cev Lab building in Carpi (province of Modena) the first Gruppo Bruno Business Forum. 150 managers and directors coming from the different companies of the Grottaminarda Bruno Group meet each other in the little town of Carpi, [...]

2019-06-17T08:54:12+01:00June 17th, 2019|News|

Vibration test: more precise than ever in cevlab

WHICH IS THE MAIN AIM OF THE VIBRATION TEST? Vibration test allow to verify that the mechanical strength of an equipment may resist to any shock or impact which may occur during its lifecycle. With relation to these tests, it is important to reproduce mechanical stress phenomena that will mostly affect the [...]

2019-06-17T08:11:35+01:00June 17th, 2019|Senza categoria|

Vibration test: more precise than ever in cevlab

WHICH IS THE MAIN AIM OF THE VIBRATION TEST? Vibration test allow to verify that the mechanical strength of an equipment may resist to any shock or impact which may occur during its lifecycle. With relation to these tests, it is important to reproduce mechanical stress phenomena that will mostly affect the device. For [...]

2019-06-12T12:08:08+01:00June 12th, 2019|News|

Our LED spotlight at the Salone del Mobile

Milan, 17 April 2018 - On the occasion of the opening of the Salone del Mobile, the AMPEREAame was shown in the versions made by the students of the communication course of the Istituto Marangoni. We were honored to have participated in this event, which gave us the opportunity to expose our [...]

2018-05-03T08:13:04+01:00May 2nd, 2018|News|

News for CevLab’s laboratory in 2018

Each year Cevlab introduces new instruments and test machines into its laboratory, constantly expanding its services and raising the level of its expertise. In 2018 some important innovations will be introduced through the commissioning of the following new instruments: New vibrating bench with climatic chamber: the equipment, recently designed and manufactured, allows to reach maximum [...]

2017-12-21T10:07:44+01:00December 21st, 2017|News|

New 3D Scanner

Since September 2016 Cevlab has equipped the CAM2 Edge tool, a 3D scanning machine that uses blue laser light technology, and Polyworks inspector and Polyworks Engineer software. With this instrumentation, activities such as dimensional inspections, piece / CAD comparisons, alignments or reverse engineering and 3D documentation become a business reality. Along with 3D  prototyping, this [...]

2017-12-18T10:23:09+01:00December 18th, 2017|Technologies|

The new Dallara Stradale

A dream nurtured on racetracks all over the world. The racing technology applied to the pleasure of driving. A unique product, designed to enhance the company's key skills: carbon fiber structures, aerodynamics and vehicle dynamics. Varano de' Melegari, November 16 2017 - The first model of Dallara Stradale was handed over to its owner on [...]

2017-12-15T11:05:08+01:00December 15th, 2017|News, Recent Project, Technologies|